NETWORK ADAPTERS

The Quad T1/PRI module combines with other ATLAS components to implement a variety of WAN access products, including a T1 Bandwidth Manager, an ISDN Access Switch, and a Digital Access Cross-Connect System (DACS). The module provides four network ports, each of which can be independently configured to operate in T1 (DS-1 or DSX-1) or Primary Rate ISDN (PRI) modes. The Quad T1/PRI module can perform T1 to PRI conversion, translating between the robbed-bit signaling presented in a channelized T1 circuit and the D-channel signaling of a PRI circuit. When using the Quad T1/PRI module, ATLAS operates in a DACS mode supporting DS0 time slot interchange and DS0 grooming while preserving robbed bit signaling. ATLAS can be fully populated with Quad T1/PRI modules to support a pure DACSing application of 34 T1 circuits. Configuration of the Quad T1/PRI module can be accomplished through a variety of mechanisms, including Telnet or VT 100 Emulation. SNMP management is supported for alarm and event reporting. Extensive T1 circuit monitoring is standard with the Quad T1/PRI module, including the ability to detect, store, and report all performance parameters specified in AT&T Technical Reference 54016. The module detects and reports alarm conditions associated with the circuit, including Loss of Signal, Red Alarm, Blue Alarm, Yellow Alarm, and for PRI circuits, D-Channel Synchronization. The Quad T1/PRI module responds to standard loopback commands from the telephone company central office, both in-band commands and those sent through the Facilities Data Link. In addition, local and remote loopbacks (both line and payload) can be initiated from ATLAS. When testing the T1 circuit, the Quad T1/PRI module allows the user to select from a variety of test patterns, including all 1's, all 0's, as well as a standard QRSS pattern. When sending the QRSS pattern, the Quad T1/PRI module records and reports the results of the testing to the user.

T1/FT1 NIM terminates a full T1 or a fractional T1 for Frame Relay or PPP networks.

Allied Telesis AT-2701FX is the answer for those fiber adapters that support Wake on LAN (WOL) for either PCI 2.1 or PCI 2.2 systems but not both. Allied Telesis NICs support WOL through the PCI 2.2 bus and support PCI 2.1 WOL via external cables. Resistant to signal degradation, snooping, and interference, the AT-2701FX is the ideal solution for networks requiring protection from electrical interference and hackers.

Allied Telesis AT-2701FX features a full-line of card assistant software:

AT-Setup reduces Window Driver installation to a mouse click.This Windows program guides users through driver installation, updates, and problem corrections.

AT-Stat is an advanced Windows application that reports network conditions and performance such as hardware resources, network statistics, and configuration.

The VLAN protocol driver allows network administrators to configure their VLAN network fabric at the PC instead of the switch, enabling transparent movement of systems between switches.

TCP/IP Checksum off-loading improves CPU use by verifying TCP/IP traffic checksums at the adapter rather than at the host processor, improving overall system performance for slower PCs.

Packet prioritization enables Windows applications with Class of Service capabilities to prioritize out-bound packet streams to these NICs, a useful feature for video streaming and VoIP where interruptions are unacceptable. The AT-2701FX onboard Managed Boot Agent (MBA) provides a wide set of industry-standard boot protocols, including PXE, NetWare NCP/IPX, IBM's RPL, traditional DHCP, and BOOTP, supporting both BBS (BIOS Boot Specification) and non-BBS compliant PCs. It also includes an extensive set of utilities for boot ROM configuration, as well as access to Pre-OS and network boot image files. Comes with MT-RJ connectors.

Features:

PCI 2.2 compliant

Wake on LAN (WoL)

Secured transmissions

Advanced installation utility

Advanced diagnostics

Managed Boot Agent architecture (MBA)

TCP/IP checksum off-loading

VLAN support

Traffic prioritization

Low-profile option

1MB FIFO

Driver support for popular operating systems

Comes with MT-RJ connector

User guide

Lifetime warranty

AT-2711FX 1x PCI-Express design gives you the maxim possible bandwidth and bus efficiency, Hot Swappable capability and Low Power Consumption. The priority queuing and virtual LAN features offered by AT-2711FX can help users set up the network based on their own needs. The comprehensive diagnostics and configuration software suite provides system administrators and engineers with a profound tool to analyze the network adapter and check specific data. AT-2711FX Fast Ethernet Fiber Adapter comes with a variety of reliability features. They aim at maintaining a connection as long as possible. This is reached by link aggregation, heterogeneous mixed-speed failover and hot swap.

The AT-2711FX Fast Ethernet fiber interface card comes with a comprehesive Windows utility that performs detailed tests, diagnostics, and analysis.

The priority queuing offered by AT-2711FX can help users set-up the network based on their own needs. The comprehensive diagnostics and configuration software suite provides system administrators and engineers with a profound tool to analyze the interface card and check specific data.

AT-2711FX x1 PCI-Express (PCIe) design gives you the maximum possible bandwidth and bus efficiency, other benefits are: capability and low power consumption.

For current customers who are using Allied Telesis†™ 100Mbps fiber cards (AT-2701FX), and want to upgrade their systems to PCI-Express, AT-2711FX is the ultimate solution.These customers can continue using their existing 100Mbps fiber network without adding any more new equipment.

Features:
Limited lifetime warranty
PCI-Express x1 interface
72KB packet buffer
TCP Checksum RX/TX supported
Wake-on-LAN (WoL)
Comes with SC multi-mode fiber connections
Driver support for Windows and Linux
IEEE 802.1x flow control
IEEE 802.1p-based traffic prioritization
PXE 2.0 remote boot support
Jumbo packet support

AT-2711FX 1x PCI-Express design gives you the maxim possible bandwidth and bus efficiency, Hot Swappable capability and Low Power Consumption. The priority queuing and virtual LAN features offered by AT-2711FX can help users set up the network based on their own needs. The comprehensive diagnostics and configuration software suite provides system administrators and engineers with a profound tool to analyze the network adapter and check specific data. AT-2711FX Fast Ethernet Fiber Adapter comes with a variety of reliability features. They aim at maintaining a connection as long as possible. This is reached by link aggregation, heterogeneous mixed-speed failover and hot swap.

The AT-2712FX network interface card is an ideal fit for fiber to the desktop networks that depend on secure and reliable systems. With a small form factor PCIe x1 bus the AT-2712FX is an ideal fit for government, education or other networks dependent on highly secure capabilities.

Allied Telesis'AT-2916SX is a high reliable 32-bit PCI Gigabit Fiber Adapter card with 9KB Jumbo frames support for network upgrade needs.AT-2916SX helps to boost your Fast Ethernet desktop throughput ten times to 2000Mbps. With the 1000Base-SX fiber-optic connection, data transmission is both secure and faster. In order to reduce CPU usage, Allied Telesis' AT-2916SX uses the adaptive interrupts and ultra-deep 96-KB packet buffer. Coupled with link aggregation and load balancing, AT-2916SX achieves the best performance of its class for desktop connectivity.

Allied Telesis'AT-2916SX is a high reliable 32-bit PCI Gigabit Fiber Adapter card. It helps to boost your Fast Ethernet desktop throughput ten times to 2000Mbps. With the 1000Base-SX fiber-optic connection, data transmission is both secure and faster.

In order to reduce CPU usage, Allied Telesis' AT-2916SX uses the adaptive interrupts and ultra-deep 96-KB packet buffer. Coupled with link aggregation and load balancing, AT-2916SX achieves the best performance of its class for desktop connectivity.